Copy data from your machine (drive C:) to drive OUTPUT (Y:)
This is a feature that helps you take data from the machine’s C drive without booting the machine via iRender Drive app. It will save you more time and money.
Watch the tutorial video below or read the following instructions:
To use Copy data from your machine (drive C:) to drive OUTPUT (Y:)
1. Click icon MACHINE’S (C:)
2. Choose your machine » Connect to it
Note
Valid machines are machines whose operating system is Windows and the status is off
When the machine is connected to the iRender drive, the status of the machine will be changed to processing, and you can’t boot the machine on the web page until the machine on the iRender drive is disconnected.
3. Copy data from drive C: to drive OUTPUT (Y:)
Choose the folder or file you need in the machines and choose the destination in OUTPUT (Y:) drive » click icon →
Note
You can delete files in the machine while connecting to clean up and reduce the machines’s size to boot them faster next time.
Please wait for our system to sync to the cloud, then you can download data from iRender Cloud to your personal computer.
4. Disconnect the machine when done
Click the Disconnect button to disconnect the machine.
Note
After the machine on the iRender drive has been disconnected, you can boot the machine on the web page.
Our system will automatically disconnect the machine on the iRender Drive after 10 minutes of no action.
